Synthesis and fluorescence properties of DMCX+—a stable oxygen-bridged [4]helicenium dye

A one-step synthesis of the stable [4]helicenium dye, 1,13-dimethoxy-chromeno[2,3,4-kl]xanthenium hexafluorophosphate (DMCX⁺) from the readily available tris(2,6-dimethoxyphenyl)carbenium ion is reported. The crystal structure, the chemical stability, and dye properties of the DMCX⁺ helicenium system are described.     

Cone motion viscosity and optical second harmonic generation of ferroelectric liquid crystalline dendrimers

We report second harmonic generation in a ferroelectric liquid crystalline trimer and ferroelectric liquid crystalline dendrimers of first, second and third generation. Thin cells were filled with the compounds by capillary forces at elevated temperature, and cooled from the surface stabilized ferroelectric state to below the glass transition temperature, while kept in an electric field. The cone motion viscosity and the threshold electric field for unwinding of the helix axis of the chiral tilted smectic mesophases were studied separately at elevated temperature, and these data were used to optimize the preparation of the films. The measured response time was between 0.3 and 3ms, which corresponds to a cone motion viscosity between 0.5 and 50 Pa s. Second harmonic generation was studied both at elevated temperature with an electric field and at room temperature with and without electric field. The first generation dendrimer exhibited a strong increase in the second order non-linear optical response with time at room temperature. The d ₂₃-coefficient of this dendrimer was approximately four times larger than for the other macromolecules and was 0.045 pm V^-1. The relatively large d-coefficient of the first generation dendrimer is ascribed to crystallization, which improved the orientation of the molecular dipoles.     

Preparation of Gradient Surfaces by Using a Simple Chemical Reaction and Investigation of Cell Adhesion on a Two‐Component Gradient

This article describes a simple method for the generation of multicomponent gradient surfaces on self‐assembled monolayers (SAMs) on gold in a precise and predictable manner, by harnessing a chemical reaction on the monolayer, and their applications. A quinone derivative on a monolayer was converted to an amine through spontaneous intramolecular cyclization following first‐order reaction kinetics. An amine gradient on the surface on a scale of centimeters was realized by modulating the exposure time of the quinone‐presenting monolayer to the chemical reagent. The resulting amine was used as a chemical handle to attach various molecules to the monolayer with formation of multicomponent gradient surfaces. The effectiveness of this strategy was verified by cyclic voltammetry (CV), matrix assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (MS), MS imaging, and contact‐angle measurements. As a practical application, cell adhesion was investigated on RGD/PHSRN peptide/peptide gradient surfaces. Peptide PHSRN was found to synergistically enhance cell adhesion at the position where these two ligands are presented in equal amounts, while these peptide ligands were competitively involved in cell adhesion at other positions. This strategy of generating a gradient may be further expandable to the development of functional gradient surfaces of various molecules and materials, such as DNA, proteins, growth factors, and nanoparticles, and could therefore be useful in many fields of research and practical applications.     

Differentiation and quantification of synthetic phosphatidylethanol (PEth) homologues by 1H- and 13C-NMR in polar organic solvents

Various phosphatidylethanol (PEth) derivatives, the corresponding reversed positional isomers (RPI-PEths), lyso-PEth-16:0, and penta-deuterium-labeled PEth analogs (d5-PEths), were synthesized by enzyme-independent synthetic routes. A general solvent system consisting of a mixture of acetone-d6 and methanol-d4 (97:3; v/v) was found to provide a good solubilizing capacity and excellent hydrogen-1 NMR (¹H-NMR) peak resolution of various PEth homologues. Analytical differentiation of PEth from the corresponding RPI-PEth by carbon-13 NMR (¹³C-NMR) was demonstrated by comparison of the ¹³C-NMR signals of the carbonyl groups, the allylic positions, and of the β-carbons. An exemplary stable long-term room temperature, DMSO-d6-based, and proton-sensitive quantitative nuclear magnetic resonance (¹H-qNMR) independently quantified calibrator comprising PEth-16:0/18:1 for liquid chromatography (tandem) mass spectrometry (LC-MS/MS) analytical applications were prepared by employment of sodium dodecyl sulfate (SDS) as a solubilizing additive. In summary, novel hypothetically occurring PEth derivatives, e.g., RPI-PEths, have been independently synthesized with regio- and stereochemical control. Use of polar organic solvents, e.g., mixtures of acetone-d6 and methanol-d4 or DMSO-d6, improves spectral line shapes as compared to traditional hydrophobic solvents and allow for analytical differentiation between closely related PEth derivatives, as well as LC-MS/MS-independent concentration determination of dissolved single species by employment of ¹H-qNMR.

N-Aryl Isoleucine Derivatives as Angiotensin?II AT2 Receptor Ligands

A novel series of ligands for the recombinant human AT₂ receptor has been synthesized utilizing a fast and efficient palladium-catalyzed procedure for aminocarbonylation as the key reaction. Molybdenum hexacarbonyl [Mo(CO)₆] was employed as the carbon monoxide source, and controlled microwave heating was applied. The prepared N-aryl isoleucine derivatives, encompassing a variety of amide groups attached to the aromatic system, exhibit binding affinities at best with K_i values in the low micromolar range versus the recombinant human AT₂ receptor. Some of the new nonpeptidic isoleucine derivatives may serve as starting points for further structural optimization. The presented data emphasize the importance of using human receptors in drug discovery programs.     

Stability Enhancement of a Dimeric HER2-Specific Affibody Molecule through Sortase A-Catalyzed Head-to-Tail Cyclization

Natural backbone-cyclized proteins have an increased thermostability and resistance towards proteases, characteristics that have sparked interest in head-to-tail cyclization as a method to stability-enhance proteins used in diagnostics and therapeutic applications, for example. In this proof-of principle study, we have produced and investigated a head-to-tail cyclized and HER2-specific Z_HER2:342 Affibody dimer. The sortase A-mediated cyclization reaction is highly efficient (>95%) under optimized conditions, and renders a cyclic Z_HER3:342-dimer with an apparent melting temperature, T_m, of 68 °C, which is 3 °C higher than that of its linear counterpart. Circular dichroism spectra of the linear and cyclic dimers looked very similar in the far-UV range, both before and after thermal unfolding to 90 °C, which suggests that cyclization does not negatively impact the helicity or folding of the cyclic protein. The cyclic dimer had an apparent sub-nanomolar affinity (K_d ~750 pM) to the HER2-receptor, which is a ~150-fold reduction in affinity relative to the linear dimer (K_d ~5 pM), but the anti-HER2 Affibody dimer remained a high-affinity binder even after cyclization. No apparent difference in proteolytic stability was detected in an endopeptidase degradation assay for the cyclic and linear dimers. In contrast, in an exopeptidase degradation assay, the linear dimer was shown to be completely degraded after 5 min, while the cyclic dimer showed no detectable degradation even after 60 min. We further demonstrate that a site-specifically DyLight 594-labeled cyclic dimer shows specific binding to HER2-overexpressing cells. Taken together, the results presented here demonstrate that head-to-tail cyclization can be an effective strategy to increase the stability of an Affibody dimer.     

Anomalous curie response of impurities in quantum-critical spin-1/2 Heisenberg antiferromagnets

We consider a magnetic impurity in two different S=1/2 Heisenberg bilayer antiferromagnets at their respective critical interlayer couplings separating Néel and disordered ground states. We calculate the impurity susceptibility using a quantum Monte Carlo method. With intralayer couplings in only one of the layers (Kondo lattice), we observe an anomalous Curie constant C*, as predicted on the basis of field-theoretical work [S. Sachdev, Science 286, 2479 (1999)10.1126/science.286.5449.2479]. The value C* = 0.262 +/- 0.002 is larger than the normal Curie constant C=S(S+1)/3. Our low-temperature results for a symmetric bilayer are consistent with a universal C*.     

Transition from a two-dimensional superfluid to a one-dimensional Mott insulator

A two-dimensional system of atoms in an anisotropic optical lattice is studied theoretically. If the system is finite in one direction, it is shown to exhibit a transition between a two-dimensional superfluid and a one-dimensional Mott insulating chain of superfluid tubes. Monte Carlo simulations are consistent with the expectation that the phase transition is of Kosterlitz-Thouless type. The effect of the transition on experimental time-of-flight images is discussed.     

Optimal estimation of the diffusion coefficient from non-averaged and averaged noisy magnitude data

The magnitude operation changes the signal distribution in MRI images from Gaussian to Rician. This introduces a bias that must be taken into account when estimating the apparent diffusion coefficient. Several estimators are known in the literature. In the present paper, two novel schemes are proposed. Both are based on simple least squares fitting of the measured signal, either to the median (MD) or to the maximum probability (MP) value of the Probability Density Function (PDF). Fitting to the mean (MN) or a high signal-to-noise ratio approximation to the mean (HS) is also possible. Special attention is paid to the case of averaged magnitude images. The PDF, which cannot be expressed in closed form, is analyzed numerically. A scheme for performing maximum likelihood (ML) estimation from averaged magnitude images is proposed. The performance of several estimators is evaluated by Monte Carlo (MC) simulations. We focus on typical clinical situations, where the number of acquisitions is limited. For non-averaged data the optimal choice is found to be MP or HS, whereas uncorrected schemes and the power image (PI) method should be avoided. For averaged data MD and ML perform equally well, whereas uncorrected schemes and HS are inadequate. MD provides easier implementation and higher computational efficiency than ML. Unbiased estimation of the diffusion coefficient allows high resolution diffusion tensor imaging (DTI) and may therefore help solving the problem of crossing fibers encountered in white matter tractography.     

Diffusion-direction-dependent imaging: a novel MRI approach for peripheral nerve imaging

A novel magnetic resonance imaging approach, called diffusion-direction-dependent imaging (DDI), is introduced. Due to inherent anisotropic diffusion properties, peripheral nerves can be visualized on diffusion tensor imaging (DTI). The largest signal attenuation on DTI correlates with the direction of a nerve fiber, and the least signal attenuation correlates with the direction perpendicular to the nerve fiber. Since low signal-to-noise ratio is a concern in peripheral nerve DTI, we explored a new approach focusing on the perpendicular diffusion direction. A 36-gradient diffusion direction scheme was used. A mean expected curve specific for peripheral nerves was calculated based on the sciatic nerve and its division into the common peroneal nerve and the tibial nerve in three healthy volunteers. By a simple postprocessing method, a comparison of the mean expected curve and the measured curve was made voxel by voxel, and the sciatic nerve and its division were reconstructed, excluding other tissues. More studies are needed to investigate whether other postprocessing methods or other diffusion direction schemes are more suited for peripheral nerve imaging with DDI. Further studies may also be of interest to investigate whether DDI can be a complementary method to conventional T(1)-weighted and T(2)-weighted sequences in the imaging of peripheral nerve pathology or even in the visualization of other tissues, possibly with different diffusion direction schemes.